Competent consulting
Fast Shipment
Shipping to Packstations
Free return **
The boot stretcher features sturdy stainless steel hardware and an elegantly constructed polished beech wood toe block. The shoe stretcher is centrally designed and built and thus can be used for the right and left shoe.
3 differently sized spot-stretching plugs made of plastic which can be placed on 16 different plug slots (8 each on the left and right sides) are included in order to target as individually as possible the spot on the shoe which to be stretched.
Up to 3 points can be stretched simultaneously with one action.
• widen the boots in the forefoot area and on the instep
• Dimensions of the plastic buttons: round with about 1.6 cm x 1.6 cm x 1.6 cm lxwxh, oval with about 2.7 cm x 1.6 cm x 1.6 cm lxbxh and oval with about 4 , 2 cm x 1.6 cm x 1.6 cm lxwxh
• very sturdy and elegant craftmanship
• Spare parts are available from us (on request)
We give a 3-year guarantee on this boot stretcher! warranty Terms
Size S 39/40: Length 19 cm (*54 cm) Width 8 - 10,5 cm
Size M 41/43: Length 20 cm (*55 cm) Width 9 - 11 cm
Size L 44/46: Length 21 cm (*56 cm) Width 9,5 - 11,5 cm
Size XL 46,5/48: Length 22 cm (*57 cm) Width 10 - 12 cm
* Total length of the boot stretcher incl. Grip
For shoes with a high shaft (from 12.5 cm measured from the ground)
Instructions
Before you begin:
Make sure the toe block is in its closed default position. Turn the widening handle counterclockwise to close the toe block.
The heel block must be as close to the toe block as possible. Turn the lengthening wheel clockwise to move the heel block fully forward.
This shoe stretcher comes with 3 spot stretching plugs for corns, bunions and other pressure points. If needed, insert the plugs into the corresponding plug slots on the toe block prior to stretching.
Application
Apply shoe stretch spray to both the inside and outside of your shoe to relax the material for stretching.
Insert the toe block into the forepart of your shoe. Ensure that the heel block is also within the shoe.
To lengthen the shoe, turn the lengthening wheel counterclockwise to move the heel block towards the back of the shoe. Once firmly snug in the shoe, turn one or two more times for a proper stretch.
To widen the shoe, turn the widening handle clockwise to expand the toe block. Once firmly inside, turn two to three more times for a proper stretch.
Once your desired length and width settings are set, leave the stretcher in your shoe for at least 24 hours.
To remove the stretcher, turn the lengthening wheel clockwise and widening handle counterclockwise to fully retract each block. Pull out slowly.
Please note: Other additional items pictured are for decoration purposes only and not included in product sale.
